| Weight | 50 g |
|---|---|
| Dimensions | 9 × 4 × 4 cm |
| Test Type | Salt |
Only logged in customers who have purchased this product may leave a review.
Related products
Everything you need to keep your salt water pool clear and beautiful.
Finally an Australian produced and locally available Salt Detection Test Kit!
Refills
Refill of reagent 3 from the Salt Detection Test Kit. Note: This reagent can stain surfaces and skin, it is advised to use both Protective Gloves and Bench Protector when performing this test.
Standards
Make sure you are performing the CYA test correctly with this water sample (30mL) containing 50 ppm CYA.
Accessories
Protective Gloves in a 12 pair pack, particularly useful for the staining reagent in the Salt Detection Test Kit.
Standards
200ppm Calcium standard in ultrapure water (30mL) to calibrate your tests or test old reagents.
Standards
A carefully prepared water sample (30mL) at pH 7.2 for calibrating tests.
Accessories
Replacement Chlorine Viewing Tube from the Salt Detection Test Kit.
Accessories
Six (6) pieces of Bench Protection Sheet, incorporating a plastic backed paper layer. These are particularly useful for protecting the surface where you are performing any of the Salt Detection Tests. The Salt Detection reagent has a staining quality and this material protects against any spills soaking through and staining household surfaces or poolside equipment.
Standards
100ppm Total Alkalinity standard (30mL) will help you know if you are performing the TA test correctly.
Reviews
There are no reviews yet.